The hottest Nanjing product quality report was rel

Nanjing product quality report released coating spot check pass rate 92.86%

Nanjing product quality report released coating spot check pass rate 92.86%

March 4, 2010

[China coating information] 2009 Nanjing product quality report released. In terms of industrial product quality spot check, 19 of the 24 spot checked products have a pass rate of 100%. The passing rates of the other five products are: chemical fertilizer: 98.08%; Coating: 92.86%; Feed: 90.91%; Furniture: 87.77%; Refrigeration equipment: 85.71%. The passing rate of the spot check of the two types of industrial products with market access is higher than the average passing rate of the spot check of the whole city

"origin Nanjing" -- see these words, you can be relieved about the products you buy or use. On March 3, the 2009 Nanjing product quality report was released. The report shows that in 2009, the national, provincial and municipal quality supervision departments carried out quality supervision and spot checks on 164 key products of 43 categories in 15 major industries including textile, chemical, food, electromechanical and so on. A total of 3983 batches of products covering 2626 enterprises in the city, with an average passing rate of 91.99%, an increase of 0.65 percentage points year-on-year in 2008

local food: be careful about the quality of barreled drinking water

in terms of the quality of local food, the report shows that 752 enterprises in Nanjing have obtained food production licenses, and a total of 43 1564 batches of food produced by 695 enterprises (other enterprises have no products when sampling) were sampled throughout the year. The average passing rate of spot check was 92.14%, and the passing rate of spot check of 22 local food reached 100%

in the ranking list of qualified rates of food quality supervision and random inspection, the qualified rates of Baijiu, starch and its products, and barreled drinking water ranked the bottom three, with 75%, 73.33% and 71% respectively

industrial products: casual wear has the lowest qualification rate

Nanjing product quality report released in 2009. In terms of random inspection of industrial product quality, the report shows that in 2009, the qualified rate of product quality supervision and random inspection of 511 Enterprises above Designated Size in the city reached 98.49%, 6.62 percentage points higher than the average qualified rate of random inspection, and the product quality increased steadily. At the same time, the quality level of major industrial products is high. According to reports, 19 of the 24 products have a 100% pass rate. The passing rates of the other five products are: chemical fertilizer: 98.08%; Coating: 92.86%; Feed: 90.91%; Furniture: 87.77%; Refrigeration equipment: 85.71%. The passing rate of the spot check of the two types of industrial products with market access is higher than the average passing rate of the spot check of the whole city

the products with low passing rate of spot check that are generally concerned by the public mainly include: plastic runway, with a passing rate of 71.43%. The main quality problems are: unqualified elongation at break and tensile strength; The qualified rate of concrete solid bricks is 79%. The main quality problems are: the strength grade and frost resistance are unqualified; Casual wear, the pass rate is 84.21%, the main quality problems: fiber content, logo unqualified

special equipment: continue to maintain a safe operation situation

the report shows that in 2009, special equipment continued to maintain a good situation of safe operation. A total of 3237 professionals were dispatched throughout the year, and 1004 production and user units were monitored on site; 243 sets of key monitoring equipment were inspected, 729 potential safety hazards were found, 689 special equipment safety supervision instructions were issued, and 668 items have been rectified, with a rectification completion rate of 92%

the accident rate of 10000 sets of equipment included in the statistical scope of special equipment throughout the year was 0.2, and the death rate was 0.1, continuing to maintain the stable situation of safe operation of special equipment

fight against counterfeits and safeguard rights: recover the economic loss of 23million yuan

it is reported that in 2009, Nanjing quality supervision system carried out the fight against counterfeits and safeguard rights for 17 key enterprises, recovering the economic loss of 23million yuan. All 1 Regularly check the screws at the jaw, and investigate and deal with 646 cases of various kinds every year, involving a value of 63.7567 million yuan. Among them, 190 cases of building materials such as construction steel, wires and cables, and low-voltage electrical appliances were investigated and dealt with, involving a value of more than 7.3574 million yuan

at the same time, the crackdown on major cases of counterfeiting and shoddy has been strengthened. The cases of manufacturing and selling fake wine dens in donghuagang village, counterfeiting conch cement of China cement plant, counterfeiting FAW spare parts, and cross province in-depth crackdown on counterfeiting Xizhilang jelly in Wuhu were investigated and dealt with. Among them, the case of manufacturing and selling fake FAW spare parts investigated and dealt with was rated as one of the top 10 anti-counterfeiting cases in 2009 by the AQSIQ

in addition, 131 batches of products from 126 furniture manufacturing enterprises were spot checked, and the pass rate was 87.77%, an increase of 55.27 percentage points over three years ago; The qualified rate of formaldehyde emission project was 92.37%, 34.27 percentage points higher than three years ago

contribution Honors:

two enterprises have won the national quality award

last year, the Municipal Bureau of quality supervision launched the first mayor's quality award review, and established a review committee to organize experts to review qualified application enterprises. The review opinions have been submitted to the municipal government

after Yangzi Petrochemical, Nangang group won the national quality award last year. At present, 2 enterprises in Nanjing have won the national quality award, 8 enterprises have won the provincial quality award, and 27 enterprises have won the award within the validity period, ranking second in cities under the jurisdiction of the province. 317 people in the city passed the national quality engineer's applicable materials: metal, non-metallic materials and other examinations, and a total of 2607 people obtained the quality engineering certificate, which is extremely useful, accounting for about a quarter of the number of certified people in the province, ranking first among the 15 sub provincial cities and 13 provincial-level cities in the country

the total number of effective famous brand products in China is 24, ranking 6th among sub provincial cities in China. 81 products of 75 enterprises have been awarded Jiangsu famous brand products, and the total number of Jiangsu famous brand products within the validity period has reached 181, ranking third in cities under the jurisdiction of Jiangsu Province. 249 products have been declared as Nanjing famous brand products and are being identified

three national professional standardization sub technical committees and working groups, Yurun Group, red sun group and Chenguang Group, with a total of 36; Four international standards were newly approved for development (Southeast University, Nanjing Software Association: ISO "manufacturing software unit interoperability specification one-time test method discrimination and report"; Nari Jibao: IEC "Electrotechnical terminology measurement relay"; Nanjing Fiberglass Institute of Sinoma Technology: iso3375 "glass fiber roving stiffness measurement"; Nari Jibao: IEC "distance relay"), 32 national standards and 22 industrial standards. A total of 8 international standards, 503 national standards and 171 industrial standards have been formulated and revised

5 technical standards won the "China standard innovation contribution award", with a total of 22 award-winning standards. 242 products with international standards and foreign advanced standards were added, and the total number of standards adopted reached 1943. A total of 1178 enterprise technical standards have been developed